SE Breeze-com
Perfectly protects every hinged-arm awning against wind damage
SE Breeze-com
SE Breeze-com, GR 2
Product information
A premium quality hinged-arm awning deserves special protection: Using the SE Breeze-com is the simplest and most cost-effective way to protect an awning against wind damage. An acceleration sensor installed in the drive detects vibrations of the fabric and gives the command to retract the awning. The sensitivity can be set to one of 5 levels and can also be deactivated. Thanks to the 5-conductor connection cable, this unique function is also active if the drive is being used as a solely wired solution. It is no longer necessary to install a separate wind detector.
PRODUCT BENEFITS
- Integrated wind detection protects the awning against wind damage
- A separate wind detector is not required (no installation, wiring, setting, battery changes, etc.)
- Convenient setting and adjustment of the threshold value via radio transmitter, setting cable or switch
- Gentle closing of the box with box awnings
- Point switch-off or relief of the upper end position for half-box awnings and open hinged-arm awnings
- Automatic end position setting
- Hybrid use as a radio drive or wired drive
Product videos
SE Breeze-com - Awning drive with integrated wind detection
SELVE awning drive SE Breeze-com: Setting the wind sensitivity using a commeo handheld transmitter
Initial setup of the SE Plus(-RC), SEM Plus(-RC), SE Breeze-com using a switch, top with relief
Initial setup of the SE Plus(-RC), SEM Plus(-RC), SE Breeze-com using a setting switch, top without relief
Initial setup of the SE Plus(-RC), SEM Plus(-RC), SE Breeze-com using a setting switch, 2 fixed end points
Initial setup of the SE Plus-RC, SEM Plus-RC, SE Breeze-com using a handheld transmitter, top with relief
Initial setup of the SE Plus-RC, SEM Plus-RC, SE Breeze-com using a handheld transmitter, top with relief
Initial setup of the SE Plus-RC, SEM Plus-RC, SE Breeze-com using a handheld transmitter, 2 fixed end points
Universal setting switch for all drives (SE, SE RC and SE SMI; 4 or 5 wires)
Downloads
Technical details
| Type | SE Breeze-com 2/7 |
SE Breeze-com 2/10 |
SE Breeze-com 2/15 |
SE Breeze-com 2/20 |
SE Breeze-com 2/30 |
SE Breeze-com 2/40 |
SE Breeze-com 2/50 |
|
| Article no. | 38 48 20 |
38 48 40 |
38 48 50 |
38 48 60 |
38 48 70 |
38 48 80 |
38 49 90 |
|
| Torque at rated load Nm | 7 |
10 |
15 |
20 |
30 |
40 |
50 |
|
| Pulling force N | 220 |
310 |
460 |
610 |
920 |
1230 |
1530 |
|
| Rotation speed rpm | 17 |
17 |
17 |
17 | 17 | 17 | 17 | |
| Power rating W | 95 |
124 | 152 |
172 |
220 |
345 |
345 |
|
| Current consumption A | 0,41 | 0,55 | 0,66 | 0,75 | 0,95 | 1,5 | 1,5 |
|
| Voltage V | 230 | 230 | 230 | 230 | 230 | 230 | 230 | |
| Frequency Hz | 50 | 50 | 50 | 50 | 50 | 50 | 50 | |
| Time of operation min | 4 | 4 | 4 | 4 | 4 | 4 | 4 | |
| Protective system | IP 44 | IP 44 | IP 44 | IP 44 | IP 44 | IP 44 | IP 44 | |
| Test mark | CE,VDE | CE,VDE | CE,VDE |
CE,VDE | CE,VDE | CE | CE |
|
| Limit switch range U | - | - | - | - | - | - | - | |
| Outer diameter mm | 45 | 45 | 45 | 45 | 45 | 45 | 45 |
|
| Cable length m | - | - | - | - | - | - | - | |
| Length L 1 mm |  |
497 |
497 |
522 |
537 |
557 | 559 |
610 |
| Length L 2 mm |
481 | 481 | 506 |
521 |
541 |
542 | 542 | |
| Length of square fixing pivot mm |
12 | 12 | 12 | 12 | 12 | 12 | 12 | |
Compatible controllers
